Multi-Strand Polycord Conveyor
Multi-Strand Conveyor
Merge System
Manual Pack-Off Station
SANITARY
SANITARY
SANITARY
SANITARY
Merge Conveyors & Combiner Conveyors are used to arrange products flowing from multiple infeed lines of conveyor. Typically, the merging process is needed to combine product from upstream equipment with multiple lines, into a single stream of product on a single conveyor.
Manual pack-off stations are typically a two or three-tier conveyor assemblies designed for an operator to pick and place product/ package into a cartoned case.
Multi-strand conveyors are used for a variety of reasons, and have multiple material options (plastic, sideflexing modular or polycord, flexible round belting), the multi-strand conveyor can also be used for direct product conveyance (loose product to fall into a catch pan).
Commonly used for transfer of sensitive food products (processed meat/cheese, pizza topping), polycord conveyors are available in multiple styles to suit all applications. Multi-strand belting allows for seamless transfer between sliders and scales. FDA approved, this conveyor is designed for sanitation
KEY FEATURES
OPTIONS
KEY FEATURES
OPTIONS
KEY FEATURES
OPTIONS
KEY FEATURES
OPTIONS
• Designed for light and medium sized loads • Suitable for product, packaged, cartons or case handling • Light to heavy duty construction
• Top conveyor designed for product transport • Lower conveyor designed for carton or case takeaway • Adjustable height • Stainless steel construction (welded or bolted)
• For light and medium sized loads • Suitable for product, packages, cartons, and case handling • Light duty to medium duty construction
• Multiple solutions for merging, dependent on product • Not all merge applications require an electrical controls package
• Built for light to medium-sized loads • Multiple strands allow for bottom of product to be open • Open design
• Configuration for width/length • Configuration for stacked conveyor applications • Low profile frame design for tight spaces
• Cost effective • Easy to clean • Low maintenance • Provides smooth transfer of delicate products
• Configuration to any practical length/width • End-driven or center-driven • Multiple drive options
• Wash-down applications available (dependent on product)
Product Turners
Metal Belt Curve
Metering System
Retract Conveyor
SANITARY
SANITARY
SANITARY
SANITARY
Metering systems are designed to create a minimal pitch of product that are being transported in a random pattern. There are numerous ways product can be metered. The most common way is a brake/meter conveyor system (2 conveyors).
Retractable conveyors can be pneumatically or servo actuated. The nosebar of the conveyor is designed to retract and extend to allow for product to be transferred to two different positions.
Metal belt curves are more expensive than other curves, but are a great solution in these applications. Metal Belt Curves can be a stand alone curve, or part of a conveyor that tangents upstream/ downstream.
High Speed Turners will rotate packages, cartons or cases in line with the conveyor without interruption of flow. Product turners are achieved by having two conveyors (on independent drives) running parallel to each other with minimum gap between each other.
KEY FEATURES
OPTIONS
KEY FEATURES
OPTIONS
KEY FEATURES
OPTIONS
KEY FEATURES
OPTIONS
• Great for use after enrobing to allow maximum area for drainage • Open design is perfect for cooling or drying applications • Strong tacking features • Suitable for high heat/chemical applications
• Available in either heavy duty or lighter duty. • Mesh overlay options • Nosebar transfers • Tight radius • Stand alone (no tangents) or integrated into straight
• Typically used for light and medium-sized loads • Suitable for handling products, packages, cartons, and cases • Features light-duty to medium-duty construction
• Wash down construction available • Option one drive (infeed brake conveyor to be slave driven off metering conveyor tail section) • High friction belting for metering conveyor
• Retract conveyors offer fast, efficient product handling solutions • Reject products quicker than traditional reject mechanisms • Custom-designed with automated controls, safety guarding, and tailored
• Configuration to any practical length/width • End-driven or center-driven • Multiple drive options
• Typically for light and medium sized loads • Suitable for product, packaged, cartons,or case handling
• Stainless steel construction • Combing multiple lanes into one • Small footprint depending on product size and quantity of lanes • Can handle multiple sizes by changing speed of one lane
14
15
NCC AUTOMATED SYSTEMS
215.721.1900 NCCAS.COM
Powered by FlippingBook